Видео

Link to cables???

Hilarious.🤐

Justin,,one of the tricks is to allow the silicone to cure half way then finish the tightening sequence to create a type of gasket,,good luck with your projects

Awesome project

Is the CAD model for this still available?

I have watched a couple of your video and fine that I like what you do & how you do it! I have 1/2 of a 1 car garage as my workshop and am constantly on the look out for ideas to conserve/recoup space, even if I have to rework a prior project. In this particular video you mentioned that when clamping flat stock, face to face, that the parts tend to move slightly. I have been using a small amount of table salt to help with this problem. Glue, salt, align parts and clamp. I do have an occasional need to realign but no often. a salt shaker is part of my arsenal of "woodworking" tools. Now I have to decide if I should reword my saw table/assembly bench. Thanks Justin, Red

Just came across this Video. Wonderful wood working & planning . Well done to you.

Who knows what would happen if you mess with electromagnetics like what they did? I don't doubt this actually happened.

Anyone from Ig?

I love a good example of K.I.S.S. (Keep It Simple Stupid), and this is just what I have been looking for. A simple tool, that does exactly what I want, to accurately drill 1/2" holes in one of my wood projects. Can drill other size holes with it, but all I need is 1/2". Gotta see what else you make I might be able to use, so just subscribed. This is the simpilest version of a diy drill press, the easiest and fastest way to make one, the cheapest, and the most useful. Made my day, and then some. Thanks.

So you lost space as the stuff on door is no longer usable. Just dumb

Nice job! How did you dimension the force of the gas springs? You can damp the closing with small rubber bumpers.

Yes my friend very good I go question for you what about if you have to cut like in my country big log of wood don’t work any way I going to use yours ideas in the different perspective means big pieces of wood hard wood we don’t use pine much we use wood call chanul super hard and strong for furniture thanks 🙏

This is a brilliant build, absolutely loved it

nice can i do it without half of this stuff? (99% of tools)....

Cool idea but it takes up valuable room inside the cabinet. Hinges have been used for millenia for a reason.

Excellent reel! And good editing on the short that snagged my eyes. Only regret is that there's no way in h#// I'm ever going to achieve "shop perfection" like this. What a shop!

I have all the things i need in the front of the car, but not under my dash. Could this just be me not being smart enough to find the connectors? Or am I outta luck

the reason the dust shoot is working so well with the opening is because there is easy excess for air to flow into the dust shoe then up the exit tube to the vacumm

Cool intro!!!! 😂

Great job very cool how you made all the parts

Awesome! Awesome! Awesome!

What a great idea Mate

good job bro, hello from Russia

....and those sidewalls will be great lateral stabilizers.

I love your creative process and build quality! Instant fan and subscriber.

First I've found your channel. Super impressed by your dust collection system! Time to scour your videos to see if you've got a video on how you've set it all up. Cheers!

you're nice but not everyone has the means like you to have all this equipment...

I like the wooden valves and levers you have setup very nice

Two points. 1st those "future side walls" will add stability. And you did LOSE the storage of your bits on the inside of the door. 😂😂😂😂

Great project but it all should be external rater than internal. Sure You would have to change door face to be wider but you can have internal of the cabinet configured as you want and with same volume as before.

Love this build, but does lose that inner door face storage you had before.

as an upgrade of the system, it would better if it could operate in a space bigger than the carved for the piston, all in the same plane as the cabinet laterals, hinged by metal ménsula , in order to regain internal space

it's cool, but you do lose the on door storage and organizational space. It's also kind of a silly expense to install that hinge/lift mechanism IMO. You also could have cut the door in half and made 2 doors so opening them would take up half the space. Or open and slide doors so you could slide the door into the cabinet and still keep the on door bit storage, but not have the door hanging over your work surface.

Awesome job, hopefully I’ll door .2?

8:27 Nice lesson in how not to use your CNC. Recently saw a video (and fell into a rabbit hole looking for that) that explains, that you can CNCing (or was it laser cutting?) better by using a bit of cheap sacrificial piece of wood (same size of your workpiece). You use masking tape (I think he mentioned it works only with one kind or that works the best) to the whole face of the wood and same for your workpiece and then apply superglue to the tape. Press both together. Now you can fully cut through your workpiece without leaving tabs.

Дверь стала хлипкой, левую и правую стенки теперь нельзя использовать, внутреннюю поверхность двери тоже не использовать. Уменьшился из-за боковых панелей внутренний объём. И ещё теперь нужно обязательно место сверху, куда уходит дверца. Плюс время, плюс затраты, в общем одни плюсы)

7:22 Not a t-nut. The advantage of a t-nut is that the tension load put on by the bold is securing it.

1:49 God, you are dull AF.

You also lost the hanging space on the door. Don't see the point of this idea.

awesome job done

so the inside-the-door mount point options are lost...

Super good and amazing job ! Great !

Great idea and content. Question What program do you use to draw your design and convert to cnc?

Honestly I bet your dust shoe is functioning better with that opening then it would if it was fully surrounded. I have been thinking about leaving a gap on my dust shoe opposite the bit from where the hose connects. My theory is that if you create a hard seal against the table all the way around you are actually decreasing the flow of air and causing it to pulled somewhat equally from the entire circumference of the dust shoe. By having an opening on the far side of the bit you are maintaining the airspeed while simultaneously forcing the air to pull across the cut area. Sending all the dust up the shoe.

good job

Cool, nice engineering, there seems to be a lot of negative comments? I think those people miss the point, wether it's better or not the designing and build I am sure are satisfying, and from a viewers persective very entertaining and informative. I have subscribed.👍

А почему нельзя просто по направляющим сбоку вверх сдвигать? Чем хуже?

Incrível demais parabéns pelo grande progeto perfeito gostei muito mesmo

So you lose interior space. Create opportunities for jams. Additional complexity in the build. Assumes an amount of space above the cabinet to make room for the door. Why is this better than regular door?